Follow these easy steps to get your Zanussi ZDS 2010 Dishwasher up and running in no time.
Ensure the mains plug is disconnected from the mains socket during installation. Do not install the appliance where the temperature is below 0 °C.
Remove all packaging materials before first use. This includes any protective films or covers.
Place the appliance adjacent to a water tap and a water drain. If installing under a counter, ensure the recess dimensions are suitable.
Adjust the feet to ensure the appliance is level. This is necessary to close and seal the door properly.
Connect the appliance to a hot water supply (max temperature as specified in the manual). Turn the inlet hose to the left or right to fit the installation, and ensure it is properly sealed to prevent leaks.
A qualified and competent person must perform the electrical installation. Ensure the mains plug is accessible after installation.
Fill the rinse aid dispenser and set the dosage to position 2. Fill the salt container according to the water hardness in your area.
Perform a test wash cycle without any dishes to ensure everything is functioning correctly. This will also help in adjusting the water softener settings.